Suzuki King Quad High Rise Complete Snow Plow Kit by Kolpin Powersports

Ready to turn your Suzuki King Quad into the ultimate winter workhorse? The Kolpin High Rise Complete Snow Plow Kit isn’t just a blade—it’s a professional-grade snow-clearing system designed to work as hard as your ATV.

Stop shoveling and start riding. This Kolpin kit gives your Suzuki the muscle it needs to dominate winter.

Kit includes:
- (1) Plow Blade (your choice of size)
- (1) ATV High Rise Snow Plow Push Tube
- (1) Vehicle Specific Mount

*Note: Requires a WINCH for operation (sold separately).

Snow Plow Blade
- Universal Compatibility: All are compatible with Kolpin High Rise, Storm Chaser, and Conqueror Front-Connect push tubes.
- Winch Ready: They are all designed to work with the full line of Kolpin winches.

• • Steel Blades: Kolpin Branded 17" height 
    • 48" Wide Steel Blade (31-0048)
    • 52" Wide Steel Blade (31-0052)
    • 60" Wide Steel Blade (31-0060)
  • Poly Blades: Kolpin Branded 21" height 
    • 60" Wide Poly Blade (31-2060)

Push Tube (33-0000)
- Impressive lift height with Heavy-duty, mid-mount, dual-pivot articulating frame and 20" wide blade mount platform.
- Integrated Structural Pivot Box is virtually fully assembled from the factory
- Multi-Width Blade mounting system allows current Cycle Country blades and the new wider blade support
- Heavy Duty Square Tube Steel Chassis with strategic reinforcements
- Wider mount attachment for increased blade stability
- Robust steel tube reinforcement and stamped blade technology
- Compatible with Kolpin High Rise Power Angle to optimize plowing productivity
- Quick pin attachment to 15-XXXX mounts
- Retrofits to Cycle Country blades and select mounts

Plow Mount (15-4590)
- ATV Mid-Mount specific for Suzuki KingQuad 500 / 750 models
- Made with 7 gauge steel
- Powder coat paint protection
- These mount brackets are designed to mount to the underside of your vehicle chassis.
- Compatible with Kolpin High Rise Push Tube (33-0000) and Kolpin Storm Chaser Push Tube (33-0070)

*Image is only a representation of our Mid-Mounts, actual product may vary depending on vehicle fitment

This product is designed to fit most vehicles, however Kolpin does not guarantee vehicle fitment for all vehicles. We reserve the right to make modifications / improvements to our products at any time. Pictures are a representation of the product you will be getting but may vary due to product revisions. Always refer to your vehicle’s OEM operator manual to understand warnings and fitment, which takes precedence over Kolpin product instructions and fitment.

*****OPTIONAL ADD-ONS *****

Power Angle
- Precisely rotates Conqueror & High Rise mounted blades 56° with a push of a button from the comfort of your seat with ergonomic dash/handlebar mounted controls
- Installs in less than 30 minutes with 5 bolts
- Self-locking steel gear drive isolates impact to motor and optimizes durability
- Compatible with any width blade mounted to either Kolpin ATV High Rise or Conqueror push tubes
- Accommodates 48”-72” blade widths

Winch
- Industry leading 5-year mechanical warranty
- Heavy-duty six gauge wire delivers constant power
- Reinforced structural Pivot box with 5-position angle adjustment
- Motor: 1.1–1.9 HP permanent magnet motor (depending on capacity)
- Mounting: Standard 4-bolt pattern (3.0" x 4.875")
- Weatherproofing: Fully sealed motor and gear housing
- Controls: Handlebar-mounted rocker switch (4500/6000 models often include a corded remote).

• • Steel Cable Models: Includes 50' Steel Cable; best for abrasive soil, heavy dragging, and maximum durability.
    • (25-9250) 2500 lb Series : Includes a roller fairlead.
    • (25-9350) 3500 lb Series : Built for durability in abrasive soil.
    • (25-94500) 4500 lb Series : Maximum strength for heavy dragging.
  • Synthetic Rope Models: Includes 50' Synthetic Rope; best for frequent use, plowing, and safer handling.
    • (25-9255) 2500 lb Series : Includes a high-flow aluminum hawse fairlead.
    • (25-9355) 3500 lb Series : Lightweight and safer to handle during recovery.
    • (25-9455) 4500 lb Series : Ideal for frequent use and plowing.
    • (25-9605) 6000 lb Series : The highest capacity in the standard lineup.

Winch Mount
- Fits specific Suzuki® KingQuad® models
- Sturdy line of winch mount kit provides the hardware necessary to mount a winch to your vehicle
- Designed to fit Kolpin and other branded aftermarket winches with common bolt patterns
- Made with 7 gauge steel
- Powder coat paint protection
- On some winch/winch mount combinations, the roller hawse will be included with the winch

** Actual Winch Mount may look different than reference photo shown **

Push Tube Extension Kit for Tracked Vehicle (33-0350)
- 11.0” plow extender required for Kolpin snow plow fitment to tracked ATV/UTVs
- Compatible with Kolpin Storm Chaser® (33-0070 and 34-0070) and Kolpin High Rise® (33-0000 and 34-0000) push tubes
- Quick and easy assembly in 15 minutes
- Constructed of heavy-duty 7-gauge steel with strategic reinforcements

Blade Marker Kit (10-0140)
- Increases the visibility of plow edges for added safety while plowing snow.
- Easily bolts to sides of plow blades
- Fitment to blades at 45° bend base
- Sold as a pair
- Included Mounting Hardware: (2) 5/16" x 1" Bolt, (4) Flat washer 5/16", (2) Locknut 5/16" Nyloc

Blade Wings (31-0010)
- Provides superior snow control and cutting while plowing
- Precision fit & color matched for Kolpin® Steel Blades (Not compatible with Poly Blades or Cycle Country Blades)
- Stamp-formed steel for long lasting performance
- Adds 4" of width to your plow blade
- Sold as a pair
- Fits Kolpin Steel 1-piece blades only (31-0048, 31-0052, 31-0060, 31-0066, 31-0072)

Blade Skid Shoes
- Surface Protection: Prevents the plow blade from scraping and damaging gravel, decorative stone, or uneven pavement.
- Blade Longevity: Absorbs the friction and wear that would otherwise ground down the bottom of the plow blade.
- Height Control: Allows the operator to "float" the blade just above the ground, ideal for plowing over soft or loose surfaces.
- Sold as a pair
- For Kolpin Blades ONLY

• • (31-1255) For Steel Blades - Heavy-Duty: 7mm thick; Does NOT work on Cycle Country Blades
  • (31-2155) For Polyethylene 'Poly' Blades - Also compatible with Cycle Country Poly Blades

Heated Grips - Pair (50-0360)
- Keep your hands warm and comfortable with soft heated grips
- Handlebar mounted heat dial switch
- Multiple settings for optimal temperature control
- Easy to install with fully assembled, plug-n-play electrical connectors to any standard ATV or snowmobile with 7/8" handlebars
- Simple installation and connections

Geartector® Cold Weather Handlebar Mitts
- Gauntlet-like protection and added warmth when hitting the trails or plowing the driveway
- Rigid, extra-large cuff opening holds shape as you easily slide your arm into the plush, fleece-lined sleeve
- Allows complete access to handlebar controls
- Durable Rhino plate front panel provides extra protection from stray branches or debris on the trail
- Fits virtually any ATV or snowmobile; locking drawstring cord securely fits mitts to handle bars
- Available in Black (92185) and Kolpin Pursuit Camo (92180)